MAVOLUX 5032 C USB
The precision luxmeter
With accuracy according to class C, the industrial luxmeter Mavolux 5032 C USB is primarily used for general applications.The smallest of four measuring ranges begins with an initial sensitivity of 0.1 lx. V(λ) adaptation deviation, which amounts to f1‘ < 7.5 %, is considerably better than the admissible error limit for class C.
With the help of an optional luminance attachment with an acceptance angle of 15°, the meter can be used as an unclassified luminance meters. Luminance is measured in candelas per square meter (cd/m²) or footlamberts (fL), and defines the perceived brightness of a back-lighted or reflecting surface.
At GOSSEN, great emphasis is placed upon reliability by means of calibration. For purposes of documented evidence, a factory calibration
certificate or a DAkkS calibration certificate can be ordered along. Depending on how the meter is used, we recommend a calibration interval of 12 to 24 months.
MAVOLUX 5032 C USB
Specifications
MAXIMUM PRECISION
Classified measurement of illuminance in lx or fc in accordance with class C per DIN 5032-7, appendix B of IEC
13032-1 and CIE 69.
COSINE CORRECTION
The luminosity of a flat measuring surface is proportional to the cosine of the incident angle of light. This relationship is taken into consideration by the sensor during evaluation.
CONVENIENT EVERYDAY USE
Simple operation, easy to read display, compact design, protection during transport in a high quality aluminum case.
SIMPLE EXPANSION OF FUNCTIONS
Unclassified measurement of luminance in cd/m2 or fL is made possible by the optional luminance attachment.
An additional adapter disc prevents erroneous measurements due to incidence of light from the side.
V(λ) ADAPTATION
The spectral sensitivity of the silicon photodiode is color corrected and corresponds to the spectral brightness sensitivity of the human eye V(λ). The quality of this adaptation represents a significant difference between the class B and class C variants.
COMPUTER-AIDED MEASUREMENT
The meter’s continuous operating mode is assured thanks to power supply via the USB port. Meter control, as well as reading, display and storage of measured values, is managed with GLUX 2 software, included in the delivery contents.
NON-VOLATILE MEMORY
100 measured values can be saved, retrieved or transmitted to a PC via the integrated USB port. Average illuminance values can also be calculated as a result.
-
QUALITY ASSURANCE
light measuring
-
WORKPLACE LIGHTING
light measuring
-
MEDICAL TECHNOLOGY
light measuring
Downloads
SOFTWARE
| MAVOLUX 5032 C USB | |
|---|---|
 |
gLux 2 (ZIP) Measurement display, measurement acquisition and meter control |
|
gLux 2 (RAR) Measurement display, measurement acquisition and meter control |
OPERATING INSTRUCTIONS
| MAVOLUX 5032 C USB | |
|---|---|
|
OPERATING INSTRUCTIONS (PDF) German/English |
|
OPERATING INSTRUCTIONS (PDF) Italian |
|
OPERATING INSTRUCTIONS (PDF) French/Spanish |
 |
EU DECLARATION OF CONFORMITY (PDF) CE-Declaration MAVOLUX 5032 C USB |
CATALOGUES
| MAVOLUX 5032 C USB | |
|---|---|
|
LIGHT MEASURING (PDF) Catalogue German |
|
LIGHT MEASURING (PDF) Catalogue English |
|
LIGHT MEASURING (PDF) Catalogue French |
|
LIGHT MEASURING (PDF) Catalogue Italian |
|
LIGHT MEASURING (PDF) Catalogue Spanish |
|
LIGHT MEASURING (PDF) Catalogue Chinese |
|
PHOTOMETRY COMPENDIUM (PDF) German |
|
PHOTOMETRY COMPENDIUM (PDF) English |
PRESS INFORMATION
| MAVOLUX 5032 C USB | |
|---|---|
|
PRESS RELEASE (DOC) German |
|
PRESS RELEASE (DOC) English |
|
PRESS IMAGES 300 dpi |
MAVOLUX 5032 C USB – Technical Data
Class C DIN 5032-7 / EN 13032-1 annex B
MEASURING FUNCTIONS
| MAVOLUX 5032 C USB | |
|---|---|
| Illuminance [Lux] | 0.1 lx…199 900 lx/ 0.01 fc …19 990 fc |
| Luminance | 1 cd/m²…1 999 000 cd/m²/0.1 fL…199 900 fL with optional luminance attachment, not classified |
| Measuring ranges | 4 |
| Measuring range selection | Automatic / manual |
| Measuring rate | 2 per second |
| Measuring method | Distance measurement, Contact measurement with optional luminance attachment |
| Measuring sensor | Silicon photodiode with V (λ) filter |
| Probe with tripod thread | • |
| Measurement cable | 1.5 m, firmly connected |
| Measured value memory | 100 measured values |
| Error limit – V(λ) adapted (f1‘), typical | < 7.5 % |
| Error limit – overall error, typical | ≤ 15 % |
| Accuracy | ± 3 % of reading ± 1 digit |
POWER SUPPLY
| MAVOLUX 5032 C USB | |
|---|---|
| Battery | 1.5 V mignon, type AA |
| Automatic battery control | • |
| Automatic shutdown | 4 min / continuous operation |
| Power supply | USB |
OPTIONAL ACCESSORIES
| MAVOLUX 5032 C USB | |
|---|---|
 |
FACTORY CERTIFICATE H997B |
 |
DAkkS CERTIFICATE H997D |
 |
LUMINANCE ATTACHMENT M516G |
 |
ADAPTER DISC M499G |
| MEASUREMENT CABLE 3m M502N-3M |
|
| MEASUREMENT CABLE 5m M502N-5M |
|
| MEASUREMENT CABLE 10m M502N-10M |
OPERATION
| MAVOLUX 5032 C USB | |
|---|---|
| Display | 3 1/2 digit LCD |
| Operating elements | 6 keys |
| Interface | USB 1.1 |
| Software | GLUX 2 |
MISCELLANEOUS
| MAVOLUX 5032 C USB | ||
|---|---|---|
| Operating temperature | 0 °C to 50 °C | |
| Dimensions | 65 mm x 120 mm x 19 mm (meter) 31 mm x 105 mm x 30 mm (probe) |
|
| Weight | 200 g without battery | |
| Delivery contents | Aluminum case, GLUX 2 software, USB cable, battery, operating instructions, calibration protocol | |
| • Included function |
